ETD-05B激光扫描测径仪

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
该产品是一种基于激光扫描测量原理而设计的高精度非接触式的外径测量设备，仪器采用二维测量模式，有效消除工件震动造成的测量误差，特别适合生产现场的实时测量，应用通信电缆、光缆、同轴电缆、漆包线、PVC管、铜管、纤维线等圆形线材的在线检测，也可用于其它各种圆形工件的外径测量。
The product is based on the laser scanning measuring principle and design of high accuracy non-contact diameter measuring apparatus, apparatus using two-dimensional measurement mode, effectively eliminate the workpiece vibration caused by measurement error, particularly suitable for the production of field real-time measurement, application of communication cable, cable, coaxial cable, enameled wire, copper, fiber, PVC tube line circle wire on-line detecting, and can also be used for other kinds of circular workpiece diameter measurement.
二、技术指标
Two, technical indicators
测量范围(mm) 0.2~30
Measuring range ( mm ) 0.2 ~ 30
测量精度(um) ±2.0
Accuracy of measurement ( UM ) - 2
灵敏度(um) 1.0
Sensitivity ( UM ) 1
通信接口 RS485
Communication interface RS485
环境湿度 小于85%无凝露
Environmental humidity is less than 85%.
环境温度 4℃~40℃
Ambient temperature of 4 DEG C to 40 C.
仪器功耗(W) 小于50
Instrument power ( W ) of less than 50
扫描速度(m/s) 大于50
Scan rate ( M / s ) is greater than 50
工作高度(mm Min:960,Max:1350
Working height ( mm Min: 960, Max: 1350
包装规格(mm) 支架：610×210×275， 主机：441×170×546
Packaging specifications ( mm ) support: 610 x 210 x 275, 441 x 170 x 546 host:
产品配置 激光测径仪：1台；校准架：1个；标准测试棒：3根
Product configuration laser measuring diameter instrument: 1; calibration frame: 1; standard test bar: 3