SL80高精度数显式原位压力机

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
该产品适用于推定240mm厚普通砖砌体的抗压强度,是现场检测砖砌体抗压强度综合评定的首选设备。本产品已获得国家专利，专利号ZL00247528.6并由中华人民共和国国家标准GB/T50315-2000《砌体现场检测技术标准》的主编单位 四川省建筑科学研究院。吨位大、行程高、不漏油、使用方便并有数字显示表、示值精确、保留峰值。本设备由扁式千斤顶、四根强力拉杆、上压板、下压板、球头垫、手泵压力杆、高精度数显表、回位压兰等部件。
The product applies to the presumed 240mm thick common brick masonry compressive strength, is the scene of testing compressive strength of brick masonry and comprehensive evaluation of the device of choice. This product has obtained national patent, patent number ZL00247528.6 and the people's Republic of China national standard GB / T50315-2000" masonry field detection technology standard" editor units Sichuan Province Building Science Research institute. Large tonnage, travel and high, oil, easy to use and has a digital display table, showing the value of accurate, retaining the peak. The equipment consists of flat jack, four strength pull rod, the upper platen, the lower platen, ball head pad, hand pump pressure bar, high precision digital display table, back pressure, etc..
二、技术指标
Two, technical indicators
★额定压力：800KN
Of rated pressure: 800KN
★极限压力：1000KN
On the limit pressure: 1000KN
★最大行程：20mm
Maximum stroke: 20mm.
★极限行程：25mm
Ultimate journey: 25mm.
★示值相对误差：3%
Of relative indication error: 3%
★上压板平面尺寸：370mmX240mm
The upper platen size: 370mmX240mm plane.
★设备总重量：104kg、其中扁式千斤顶57kg
The total weight of equipment: 104kg, wherein the flat jack 57kg
★下压板尺寸：240mmX240mm
On the lower platen size: 240mmX240mm
★贮油量：1.5升
In the oil storage capacity: 1.5 l
★扁式千斤顶主缸直径：168mm
Of flat jack cylinder diameter: 168mm