SW-40多功能强度检测仪

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
该产品主要用于建筑工程混凝土强度（C10～C80）检测和饰面砖粘结强度检测和其它有关拉拔强度的现场检测。
The products are mainly used for construction of concrete strength ( C10 ~ C80 ) detection and facing brick adhesive strength testing and other related drawing strength test.
二、技术指标
Two, technical indicators
★油路完全内置，外观更简捷。可避免因油管外置而造成仪器的 可靠性下降和容易损坏，为目前市场销售的系列多功能强度检仪的更新换代产品。
Of oil is completely built, appearance more simple. Can be avoided by the tubing external caused by instrument reduced reliability and easy to damage, as the current market of series multi function strength detecting instrument for the upgrading of products.
★采用我公司最新开发的SW-4B智能数字压力表，有数据存储、查询和峰值保持功能，采用软件标定，无须拆开压力表，当外加力到指定压力时，只需按一下“设置”键即可完成，是目前市场上唯一有此项功能的现场便携式多功能强度检测仪，极大地方便用户的标定和使用，深受欢迎。
In using the latest development of the SW-4B intelligent digital pressure gauges, data storage, query and the peak hold function, using the software calibration, without opening the pressure meter, when the external force to the specified pressure, just click the" Settings" button to complete, is currently on the market only has the function of a field portable multi functional strength tester, a great convenience to the user of the calibration and use of, the popular.
★采用“后装拔出法”测强原理，该原理为我国检测混凝土抗压强度标准试验方法，符合《后装拔出法检测混凝土强度技术规程》（CE CS69：94），当混凝土有一定强度时，可随时进行检测。
In the" pull out post-insert method" measuring strong principles, the principle for our detection standard test method for compressive strength of concrete, with" pull out post-insert method technical specification for inspection of concrete strength" ( CE CS69: 94 ), when the concrete has a certain strength, can at any time for testing.
符合《建筑工程饰面砖粘结强度检验标准》（JGJ110-97）及《外墙饰面砖工程施工及验收规程》（JGJ126-2000）
In line with" adhesive strength of tapestry brick of construction inspection standards" ( JGJ110-97 ) and" outer brick specification for construction and acceptance of" ( JGJ126-2000 )
★许多地方建立了测强曲线，该检测方法已在全国范围内被各质检检测单位及试验室所广泛使用
In many places to build strength test curve, the detection method in the nationwide by the quality testing units and laboratories are widely used
★每台仪器出厂前均通过法定计量单位标好，直接使用，压力表显示单位为kN
Of each instrument factory through the legal units of measurement standard, direct use, the pressure meter shows the unit kN
三、产品特点
Three, product characteristics
★最大拔出力：40\50 kN ( 可选 )
Of maximum pull-out force: 40 \ 50 kN ( optional)
★油缸行程：10㎜
Of cylinder stroke: 10 mm
★最小分度值：0.01kN
The minimum value of index: 0.01kN
★误差：小于2%
Error: less than 2%.
★主机重量：4.2㎏
Host weight: 4.2 kg.
★电源：镍氢充电电池
Power: rechargeable batteries.