SW-CRY建筑围护结构传热系数检测仪

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
本系统由精密传感器、电子检测装置、与计算机连接的通信线、配套软件等部分组成,采用进口精密传感单元和优化电路设计系统，从而实现节能参数的精密检测；具有操作极其简单、自动检测、高精度、体积小、携带方便，可与计算机连接通信、对检测数据的后续处理功能强大、可直接生成检测报告等特点；本自动化检测系统的操作极为简单，具有“傻瓜”型的特点，任何人（不论其文化程度如何）在经过1-2个小时的培训后都可熟练、方便使用，大大简化了操作人员的操作难度和劳动强度；可广泛应用于建筑质量检测部门、建筑物保温材料生产单位的质量检测等场合，其整体性能居国内领先水平；
This system is composed of sensors, electronic testing device, and the computer is connected to the communication line, software components, use of imported precision sensing unit and circuit optimization design system, so as to achieve energy saving parameter precise detection; operation is extremely simple, automatic detection, high precision, small volume, convenient carrying, and can be connected with the computer communication on the detection of subsequent processing of the data, powerful function, can be directly generated test report characteristics; the automatic detection system has the advantages of simple operation, with" fool" model characteristic, anyone ( regardless of its cultural degree how ) after 1-2 hours after training can be skilled, convenient use, greatly simplifies the operation the operation difficulty and labor intensity; and can be widely applied to construction quality inspection department, building insulation materials production units, quality inspection and other occasions, the overall performance of the domestic leading level;
二、技术指标
Two, technical indicators
★热流密度测量：通道：2路通道, 用于建筑围护结构热流密度测量。
Of heat flux density measurement: channels: 2 channels for building envelope, heat flux density measurement.
1.测量范围：0—20mV
1 measuring range: 0 - 20mV
2.分辨率：0.001 mV(即1uV)
The 2 resolution: 0.001 mV (1uV )
3.最大误差：+（0.05%读数+3个字）。
Maximum error: 3 + ( 0.05% + 3 word readings ).
★温度测量：通道：8路通道，其中3路用于建筑围护结构内表面温度测量；3路用于建筑围护结构外表面温度测量；1路用于室内空气温度测量；1路用于室外空气温度测量。
In temperature measurement: Channel: Channel 8 Road, 3 road to the inner surface of building envelope temperature measurements; 3 for wall surface temperature measurement; 1 for indoor air temperature measurement; 1 for outdoor air temperature measurement.
1.测量范围：-50℃---- 75℃
1 measuring range: - 50 C - 75 DEG C.
2.分辨率：0.0026℃。
The 2 resolution: 0.0026 C.
3.最大误差：0.09℃（小于0.1℃）。
3: 0.09 degrees C ( maximum error of less than 0.1 DEG C ).
★采用3.6伏高能充电锂电池
By 3.6 volts of high energy rechargeable lithium battery
★采样周期：3600秒。
Sampling time : 3600 seconds.
★记录数据：可连续测量18天
Of record data: continuous measurement for 18 days
★数据通信：可与计算机RS-232端口及USB接口通信。
In data communications: with the computer RS-232 interface and USB communications interface.
★软件环境：Windows2000或 Windows XP操作系统。
Of software environment: Windows2000 or Windows XP operating system.
三、基本配置
Three, the basic configuration
★SW-CRY建筑维护结构传热系数检测仪主机 1台
SW-CRY building maintenance structure heat transfer coefficient tester host and 1
★精密热流传感器 2套
2 sets of precision heat flux sensor
★精密温度传感器 8套
8 sets of precision temperature sensor
★传热系数检测仪计算分析软件 1盘
Calculation and analysis of heat transfer coefficient tester software 1 set
★数据传输线　　　　　　　　　　　　　　　 1根
Data transmission line 1.
★说明书、保修卡及合格证 各1张
In the manual, warranty card and certificate 1 pieces
★便携箱 2个
Portable box 2.