SW-180T钢筋扫描仪(功能加强型）

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
该产品可确定钢筋的位置、间距，已知直径检测混凝土保护层厚度、未知直径检测钢筋直径和混凝土保护层厚度，也可对非磁性和非导电介质中的磁性体及导电体的位置进行检测，是一种集自动检测、数据存储和输出功能的智能化便携式无损检测设备。为配合《混凝土结构施工质量验收规范》（GB 50204-2002）中对梁和板类构件中钢筋保护层厚度的检测，我公司研制和生产出高性能的钢筋探测仪，该产品采用先进的电磁脉冲技术、计算机计术，在大量实验的基础上，研制出具有独特的检测功能，实现了混凝土保护层厚度的动态监测和自动准确地记录保护层的厚度，最大探测在190mm，全中文菜单，大屏幕液晶显示,带背景光，功能强大的数据处理分析软件，使你在检测后数据处理变得轻松自如。
The product can be identified reinforced location, spacing, known diameter measuring thickness of concrete protective layer, unknown diameter detection bar diameter and thickness of concrete protective layer, but also on the non magnetic and non-magnetic dielectric magnetic body and the conductive body detects the position of, is a set of automatic detection, data storage and output functions nondestructive testing of portable equipment. To tie in with the" code for acceptance of construction quality of concrete structure" ( GB 50204-2002 ) of beam and plate in reinforced concrete protective layer thickness testing, our company development and production of high performance steel detector, the product uses advanced electromagnetic pulse technology, computer technology, based on lots of experiments, has developed a unique detection function, realize the thickness of concrete protective layer dynamic monitoring and automatic accurate recording of the protective layer thickness, maximum detection in 190mm, full Chinese menu, large screen liquid crystal display, with a background light, powerful data processing and analysis software, make you relaxed after the detection data processing.
二、技术指标
Two, technical indicators
★钢筋直径适应范围 ：Ф6mm～Ф50mm
Of steel bar diameter range: with 6mm to with 50mm
★钢筋直径常用档级为：Ф6，Ф8 Ф10，Ф12, Ф14, Ф16,Ф18, Ф20，Ф22, Ф25,Ф28, Ф32, Ф36，Ф40, Ф50。
Of commonly used for steel bar diameter grade: with 6, with 8 with 10, with 12, with 14, with 16, with 18, with 20, with 22, with 25, with 28, with 32, with 36, with 40, with 50.
★钢筋保护层厚度最大允许误差 单位：mm
On the reinforcement protection layer thickness of the maximum permissible error of unit: mm
最大允许误差 保护层厚度标称范围
The maximum permissible error of protective layer thickness nominal range
第一标称范围 第二标称范围
The first nominal range second nominal range
±1 6～60 7～80
+ 16 ~ 607 ~ 80
±2 60～70 80～120
+ 260 ~ 7080 ~ 120
±3 70～90 120～190
+ 370 ~ 90120 ~ 190
★直径标称范围：Ф6mm～Ф32mm
Nominal range of diameter: with 6mm to with 32mm
★钢筋直径示值最大允许误差：误差±1档
Of diameter of steel bar showing the value of the maximum permissible error: error of + / - 1.
★数据存储容量：12万条检测数据
Of data storage capacity: 120000 test data
★工作环境要求: 环境温度：-10℃～＋40℃ 相对湿度：<90%RH；电磁干扰：无强交变电磁场 不得长时间阳光直射
In the work environment: environment temperature: - 10 DEG C to 40 relative humidity: < 90%RH; electromagnetic interference: no strong alternating electromagnetic field not long time direct sunlight
★电池: 6节5号LR6（碱性） 电池:供电时间大于32小时
Battery: 6 of 5 LR6 ( alkaline ) battery: power supply time greater than 32 hours
★主机体积：185mm×180mm×85mm
Host: volume of 185mm * 180mm * 85mm
★仪器重量：400g
Of the weight of the instrument: 400g
★探头体积：110mm×55mm×28mm
In the probe volume: 110mm * 55mm * 28mm
★探头重量：245g
Of weight: 245g probe
三、产品特点
Three, product characteristics
★独创钢筋保护层快速检测技术
Of the original steel protective layer of rapid detection technology
★独创钢筋保护层厚度多种判读技术
Of the original thickness of reinforced protective layer of multiple interpretation technology
★独创最小厚度自动锁定技术
The minimum thickness of the original automatic locking technique
★独创密集筋分辨技术，单探头最大可测达190 mm
Dense rib of original resolution technology, single probe can measure up to 190 mm
★独创保护层厚度和钢筋直径以平面图形显示技术
Of the original protective layer thickness and diameter of steel bar with graphic display technology
★RS232接口和USB接口
RS232 interface and USB interface
四、产品功能
In four, the product function
★检测钢筋混凝土结构中钢筋的位置及走向；
Detection of reinforcing steel bar in reinforced concrete structure position and trend;
★已知直径，检测钢筋的保护层厚度；
Detection of known diameter, reinforced protection layer thickness;
★未知直径，检测钢筋直径和保护层厚度
The diameter of the unknown, detection of bar diameter and thickness of protective layer
★探头自校准功能
Probe self calibration function.
★保护层厚度和钢筋直径自动锁定功能
Of protective layer thickness and diameter of steel bar automatic locking function
★检测数据的存储和查询功能
In the detection of data storage and query functions
★数据传输和处理功能
Data transmission and processing functions.