SYD-4508C沥青延伸度试验器

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
本仪器是根据中华人民共和国标准GB/T4508《石油沥青延度测定法》、中华人民共和国行业标准JTJ052《公路工程沥青及沥青混合料试验规程》中的T0605《沥青延度试验》规定的要求设计的，适用于按GB/T4508、或JTJ052—T0605标准所规定的方法测定石油沥青在规定的条件和一定的温度下以一定的速度拉伸至断裂时的长度，以cm表示。
The instrument is based on the standards of people's Republic of China GB / T4508" oil standard test method for ductility of bitumen", the people's Republic of China industry standard JTJ052" highway engineering asphalt and asphalt mixture test procedures in the" T0605" asphalt ductility test" in accordance with the requirements of design, applied to a GB / T4508, or JTJ052. The T0605 specified in the standard method for the determination of petroleum asphalt in the prescribed conditions and under a certain temperature to a certain speed stretching to fracture length, expressed in cm.
二、技术指标
Two, technical indicators
★工作电源：交流220V（-5%~+10%），50Hz。
Of working power: 220V ( - 5% ~ + 10% ), 50Hz.
★测量范围：1.5m（±10mm）。
Of measurement range: 1.5m ( + 10mm).
★加热形式：电加热器加热。
In the form of heating: electric heater.
★加热功率：3000W。
Heating power: 3000W.
★浴液循环：强磁力循环泵循环浴液。
Of bath circulation: strong magnetic circulating pump circulating bath.
★控温范围：5~49℃可调，数字显示。
In the temperature range: 5 ~ 49 degrees adjustable, digital display.
★控温精度：±0.5℃。
In the temperature control precision: 0.5 DEG c..
★拉伸速度：10 mm/min 、50mm/min两档。
Of tensile speed: 10 mm / min, 50mm / min two file.
★测量精度：±1 mm。
Of measurement accuracy: + 1 mm.
★延度显示：单片机控制、数据处理后作数字显示。
On extension of display: microcomputer control, digital display data processing after.
★制冷形式：1.25匹压缩机制冷，输入功率950W。
In 1.25 horses: refrigeration compressor refrigeration, input power 950W.
★环境温度：-10~+35℃。
Of environment temperature: - 10 ~ + 35 C.
★相对湿度：≤85%。
Relative humidity: less than or equal to 85%.
★整机功耗：不大于4100W。
Power consumption: not more than 4100W.
三、仪器特点
Three, characteristics of the instrument
★采用人性化的设计理念，试验槽内全无丝杆、导轨和其它装置，试样安装极其方便，最大拉伸长度1.5米。
On the humanized design concept, the test groove devoid of wire rod, guide and other devices, the installation of sample is extremely convenient, maximum tension length 1.5 meters.
★新颖的传动设计，拉伸全过程平稳同步，速度均匀，绝无抖动，延度显示精确。
In the novel transmission design, tensile process stable synchronization, uniform speed, no jitter, ductility display accuracy.
★配置三套延度试验的试模，试模由铜质材料制成，规格尺寸符合标准的要求。
Three sets of configuration of ductility test test mode, test mode is made of copper materials, size specifications meet the requirements of the standard.