XNS-25A粘数测定仪

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
该产品主要用于聚氯乙烯树脂或主要成分是氯乙烯的共聚物的环己酮稀溶液粘数的测定,符合GB3401标准的要求。该产品采用成型单元控制表控温，由恒温水浴槽和粘度计两部分组成，具有控温精度高、温度梯度小、性能稳定等特点。该产品是企业生产控制、来料检验理想的仪器，具有制冷功能。
The products are mainly used in PVC resin or is the main component of vinyl chloride copolymers -- Determination of cyclohexanone dilute solution viscosity, compliance with the requirements of GB3401 standards. This product adopts the molding unit control table temperature control, by a constant temperature water bath tank and viscosity of the two component, has high precision of temperature control, the temperature gradient is small, stable performance characteristics. The product is the enterprise production control, incoming inspection of the ideal instrument, with refrigeration function.
二、技术指标
Two, technical indicators
★恒温温度：25℃
Constant temperature: 25 C.
★恒温精度：±0.05℃
In constant temperature precision: 0.05 DEG C.
★显示精度：0.01℃
Display: 0.01 degrees of accuracy
★非稀释型乌式粘度计：4—0.77±0.015mm规格的粘度计三支（或选配）
Non dilution type of Ubbelohde viscometer: 4 - 0.77 + 0.015mm size viscometer three ( or match)
★加热功率：1KW
Heating power: 1KW.
★电 源：AC220V 、50HZ
Of electrical source: AC220V, 50HZ
★环境温度：环境温度可高于25℃
Of ambient temperature: environment temperature is higher than 25 DEG C.