SYD-510G-Ⅱ石油产品凝点试验器

武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889

传真：027-86619889   网址：www.glmgs.com

一、产品简介
One, product introduction
本仪器是按照国家标准GB/T510《石油产品凝点测定法》规定的要求并根据用户的特殊要求设计制造的，适用于石油产品凝点的测定。
The apparatus is in accordance with the national standard GB / T510" petroleum products Determination of solidification point" requirements and according to the special requirements of the user design and manufacture, suitable for pour point of petroleum products - Determination of.
二、技术指标
Two, technical indicators
★工作电源：AC 220V±10%；50Hz。
Of working power: AC 220V 10%; 50Hz.
★恒温槽：单槽二浴，二浴等温。
Of thermostatic bath: single slot two baths, two bath isothermal.
★恒温槽控温：-20℃～80℃。
In the thermostat temperature: - 20 to 80 DEG C.
★控温精度：±0.5℃
In the temperature control precision: 0.5 DEG C.
★制冷系统：新型制冷压缩机。
In refrigeration system : a new type of refrigeration compressor.
★环境温度：≤30℃。
Ambient temperature below 30 DEG C:.
★相对湿度：≤85%。
Relative humidity: less than or equal to 85%.
★整机功耗：不大于1000W。
Power consumption: not more than 1000W.
三、产品特点
Three, product characteristics
★集国内外先进的低温试验器设计理念之大成，设计先进，结构合理。
In sets at home and abroad advanced low temperature tester design philosophy Dacheng, advanced design, reasonable structure.
★采用特殊的控温技术，可以实现从-20℃～+80℃温度范围内的凝点试验。
In the special temperature control technology, can be realized from - 20 degrees to + 80 degrees C temperature range of solidification point test.
★采用数字温度控制技术，高精度温度传感器，控温准确。
In the digital temperature control technology, high precision temperature sensor, the temperature control is accurate.
★仪器外壳采用喷塑技术，工作台面采用拉丝不锈钢，美观大方，经久耐用。
In the apparatus shell using spray technology, working table uses the stainless steel, beautiful, durable.