SYD-510E石油产品凝点、冷滤点试验器
产品报价:询价
更新时间:2017/6/19 16:51:41
产地:湖北
品牌:
型号:SYD-510E
厂商性质: 生产型,
公司名称: 武汉格莱莫检测设备有限公司
薛晴 : (13545068882) (027-86619996)
(联系我时,请说明是在来宝网上看到的,谢谢!)产品报价:询价
更新时间:2017/6/19 16:51:41
产地:湖北
品牌:
型号:SYD-510E
厂商性质: 生产型,
公司名称: 武汉格莱莫检测设备有限公司
薛晴 : (13545068882) (027-86619996)
(联系我时,请说明是在来宝网上看到的,谢谢!)
武汉格莱莫检测设备有限公司 电话:13545068882 027-86619889
传真:027-86619889 网址:www.glmgs.com
一、产品简介
One, product introduction
本仪器是按照国家标准GB/T510《石油产品凝点测定法》及国家行业标准SH/T0248《馏分燃料冷滤点测定法》等规定的要求设计制造的,适用于石油产品凝点及冷滤点等指标的测定。本仪器也适用于按ASTMD852、ASTMD6371及IP309等标准所规定的要求对石油产品的相关指标进行测定。
The apparatus is in accordance with the national standard GB / T510" petroleum products Determination of solidification point" and the national industry standard SH / T0248" distillate fuels - Determination of cold filter plugging point" and other provisions of the requirements of the design and manufacturing, applied to petroleum products pour point and cold filter plugging point index determination. The apparatus also applies to ASTMD852, ASTMD6371 and IP309 standards on the related index determination of petroleum products.
二、技术指标
Two, technical indicators
★工作电源:AC 220V±10%;50Hz。
Of working power: AC 220V 10%; 50Hz.
★冷槽控温:⑴ 冷槽Ⅰ:室温~-51℃,±1℃,两浴等温;⑵ 冷槽Ⅱ:室温~-80℃,±1℃,两浴等温。
Temperature control of cold trough: the cold tank I: room temperature to 51 DEG C, plus or minus 1 DEG C, two bath isothermal; the cold trough II: room temperature to 80 DEG C, plus or minus 1 DEG C, two bath isothermal.
★制冷系统:新型致冷压缩机。
In refrigeration system : a new type of refrigeration compressor.
★环境温度:≤30℃ 。
Ambient temperature below 30 DEG C:.
★相对湿度:≤85%。
Relative humidity: less than or equal to 85%.
★功 耗:不大于1500W。
Power consumption: not more than 1500W.
三、仪器成套
In three, complete sets of equipment
★多功能低温试验器(主机)
Of multi temperature tester ( host )
★冷滤点温度计
In the cold filter plugging point thermometer
★凝点温度计
Of freezing point thermometer
★冷滤点试管
Cold filter plugging point of tube
★冷滤点试管塞
In the cold filter plugging point test tube plug
★凝点试管
In the freezing tube
★凝点试管塞
In the freezing tube plug
★凝点试管定位圈(Ф50×7○型圈)
In the freezing tube positioning ring ( with 50 x 7 O-shaped ring )
★固定架
The fixed frame.
★抽滤器总成
Filter assembly.
★滤网
On screen
★吸量管
Of pipettes
★橡胶管
Rubber tube.
★回液瓶
Liquid return bottle.
★U型压差计
U type differential pressure gauge
★电源线(250V 10A)
Of power line ( 250V 10A )
★冷滤点抽滤器
In the cold filter plugging point filter
★保险丝 15A(Ф5×20)
Of fuse 15A ( with 5 x 20 )
★温度计档圈(1#)
Of thermometer stalls circle (1 # )