立式试样切割机LSQ-100，较大切割直径：100mm，适用于切割各种金属、非金属材料的样,以便观察材料金相、岩相组织

立式试样切割机LSQ-100

一、适用范围：

立式试样切割机LSQ-100，适用于切割各种金属、非金属材料的样,以便观察材料金相、岩相组织。本机带有冷却装置,使用配置好的冷却液可带走切割时所产生的热量，避免试样过热而烧伤试样组织。

该机使用方便、安全靠。是工厂、科研单位以及大专院校实验室制作试样必备的设备之一。

二、产品特点：

1.超大切割室，使本机具有了切割大型试样的功能；

2.双驱动虎钳、“T”型槽工作台，有利于用户夹持各种异型工件；

3.内置式60升超强冷却系统；

4.冷却液过滤装置；

5.独立的切割照明系统；

6.切割室及水槽进行防腐处理。

三、技术指标：

1．电源：三相四线（380V、50HZ）

2．主轴转速：2800转/分钟

3．砂轮片规格：350×2×32mm

4．最大切割直径：100mm

5. 电动机：3.0KW

Vertical sample cutting machine LSQ-100

One, applicable scope:

Vertical sample cutting machine LSQ-100, suitable for cutting various metal, non-metallic materials, in order to observe the metallographic organization, facies. The machine with a cooling device, using the configured cooling liquid can take the cutting heat generated by the sample, to avoid overheating and burn the microstructure.

The machine has the advantages of convenient use, safety on. Factories, scientific research units and colleges laboratory production samples, one of the necessary equipment.

Two, product characteristics:

1 large cutting chamber, so that the machine has the function of cutting large sample;

2 pairs of driven vise," T" type slot table, is helpful for user holding all kinds of special-shaped workpiece;

3 built-in 60 liter super cooling system;

The 4 cooling liquid filtering device;

5 independent cutting and lighting system;

The 6 cutting chamber and tank anti-corrosion treatment.

Three, technical indicators:

Power: 1 phase four wire ( 380V, 50HZ )

2 spindle speed: 2800 rpm

3 grinding wheels specification: 350 * 2 * 32mm

4: 100mm cutting diameter

5: 3.0KW motor