Long, flat fingers and miniature V-grooved rollers are used in applications where there is limited access space or where the running filaments are close together. Measuring Head Dimensions Head Width (X): 38 mm Head Length (Y): 47 mm
Features
22 mm distance between outer rollers permits a narrow access "window" of only 1/2" x 1 - 1/2". Rollers are rated for speeds up to 900 m/min. or, optionally, up to 2000 m/min (K). Turned-up outer finger edges guide the running filament into the roller grooves, eliminating snags behind the rollers.
Thread Guides
| Model | Range | | DX2F-3 | 3-30 grams | | DX2F-5 | 5-50 grams | | DX2F-12 | 10-120 grams | | DX2F-20-ALT | 10-200 grams | | DX2F-20 | 20-200 grams | | DX2F-30 | 20-300 grams | | DX2F-40 | 10-400 grams | | DX2F-80 | 100-800 grams | | DX2F-SP | 50-1000 grams | | DX2F-EX | 100-1000 grams | | DX2F-200 | 200-2000 grams |
*Note: Can be calibrated for cN units, add sufix "-CN" to end of part number DX2F Dial Faces 
*Note: not all scales are shown
Specifications
| Accuracy | ± 1% of full scale or
± 1 graduation mark on scale | | Diameter of Scale | 41 mm | | Maximum Speed | 6000 m/min | | Roller Material | Hard-coated aluminum (standard)
Hardened steel (ST)
Chromed Steel (w)
Plastic (PL) | | Housing Material | Die-cast aluminum | | Dimensions | 225 x 90 x 44 mm
(8.6" x 3.5" x 1.7") |
|
