来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

AED
现在位置首页>实验耗材配件>色谱配件>进样阀>PMF-6平面切换/进样阀
PMF-6平面切换/进样阀
PMF-6平面切换/进样阀
  • PMF-6平面切换/进样阀

PMF-6平面切换/进样阀

产品报价:询价

更新时间:2024/2/22 9:09:00

地:山东

牌:浩瀚色谱

号:PMF-6

厂商性质: 生产型,贸易型,服务型,

公司名称: 浩瀚色谱(山东)应用技术开发有限公司

产品关键词: 净化装置   碳氢化合物   环氧乙烷   芝麻香白酒   二氧化碳  

655
访问人数
0
累计评论


王经理 : (15562228838) (0632-5667636)

(联系我时,请说明是在来宝网上看到的,谢谢!)


PMF-6平面切换/进样阀

PMF-6平面切换/进样阀 详细信息:


     平面切换进样阀适用于实验室气相色谱仪器、工业在线色谱仪器、实验室气体控制流程及其它需要进行气体样品进样、反吹、切换等场合。平面切换进样阀与锥面切换进样阀属两位阀,应用方式相同。



PMF-6平面切换进样阀适用于实验室气相色谱仪器、工业在线色谱仪器、实验室气体控制流程及其它需要进行气体样品进样、反吹、切换等场合。平面切换进样阀与锥面切换进样阀属两位阀,应用方式相同。


PMF-6平面切换进样阀可实现手动切换、主机程序控制的气缸驱动器切换、主机程序控制的电动驱动器切换和独立由 PC 程序控制的电动驱动器切换。


PMF-6 平面切换进样阀可选配带无源的信号接近开关实现切换动作与工作站的启动联动,保证每次进样分析保留时间的重复性。


PMF-6平面切换进样阀可选配带保护气的装置,这在微量和痕量分析中尤为重要。


PMF-6 平面切换进样阀无论是手动切换、气缸驱动、电驱动,都可以选择紧密连接的传动杆和 2"、4"、6"的加长杆。


PMF-6 平面切换进样阀有在室温状态下工作和长期在 230℃高温状态下工作可供选择(带无源信号启动开关的不支持高温状态下工作)。


PMF-6平面切换进样阀阀体采用优质不锈钢材料制作,也可提供 PEEK 材料, 以抵抗硫化物等腐蚀性气体。


PMF-6平面切换进样阀有三通、四通、六通、八通、十通、十二通、十四通等规格可供选择;接口管外径可选择 1/16"、0.08"、1/8"。


PMF-6 平面切换进样阀的工作介质必须是干燥、无腐蚀性、无机械杂质的气体; 输入压力 750kPa max。


PMF-6平面切换/进样阀 图片及安装图纸:



PMF-6 plane switching/injection valve


PMF-6 plane switching/injection valve Details:




     The plane switching injection valve is suitable for laboratory gas chromatography equipment, industrial online chromatography equipment, laboratory gas control procedures and other occasions where gas sample injection, backflushing, and switching are required. The plane switching injection valve and the cone switching injection valve are two-position valves with the same application method.






The PMF-6 plane switching injection valve is suitable for laboratory gas chromatography equipment, industrial online chromatography equipment, laboratory gas control procedures and other occasions where gas sample injection, backflushing, and switching are required. The plane switching injection valve and the cone switching injection valve are two-position valves with the same application method.




PMF-6 plane switching injection valve can realize manual switching, cylinder driver switching controlled by the host program, electric driver switching controlled by the host program, and electric driver switching independently controlled by the PC program.




The PMF-6 plane switching injection valve can optionally be equipped with a passive signal proximity switch to realize the linkage between the switching action and the startup of the workstation, ensuring the repeatability of the retention time of each injection analysis.




The PMF-6 plane switching injection valve can be equipped with a protective gas device, which is particularly important in micro and trace analysis.




The PMF-6 plane switching injection valve can choose a tightly connected transmission rod and 2", 4", 6" extension rods whether it is manual switching, cylinder drive, or electric drive.




The PMF-6 plane switching injection valve has options for working at room temperature and working at a high temperature of 230°C for a long time (the one with a passive signal start switch does not support working at high temperature).




The PMF-6 plane switching injection valve body is made of high-quality stainless steel. PEEK material can also be provided to resist corrosive gases such as sulfide.




PMF-6 plane switching injection valve has three-way, four-way, six-way, eight-way, ten-way, twelve-way, fourteen-way and other specifications to choose from; the outer diameter of the interface tube can be 1/16", 0.08", 1/8".




The working medium of the PMF-6 plane switching injection valve must be a dry, non-corrosive, and non-mechanical gas; the input pressure is 750kPa max.



PMF-6 plane switching/injection valve pictures and installation drawings