LDI-G19-013-A220S_LDI-G19-075-A220S位移传感器OMEGA
范先生 : (15221105376) (15221105376)
(联系我时,请说明是在来宝网上看到的,谢谢!)范先生 : (15221105376) (15221105376)
(联系我时,请说明是在来宝网上看到的,谢谢!)LDI-G19-013-A220S_LDI-G19-075-A220S位移传感器OMEGA
LDI-G19 sensors have a 19 mm (0.75") diameter aluminum or stainless steel body with a 1/2-20 UNF-2A thread 38 mm (1.5") along with two 19 mm (0.75") hex jam nuts for drop-in installation in place of a spring-loaded DC LVDT gage head. These sensors utilize a probe equipped with a No. 9 contact tip and are offered with a PT02-10-6P connection (mating connector sold separately.) Operating from a variety of DC voltages, these sensors are available with a choice of one of four analog outputs. Calibration and set-up is simplified with one wire field programming feature, this provides the ability to match the endpoints of the sensor's analog output with the ends of the range of motion of the assembly to which the sensor is attached. This feature permits a user to optimize the position measuring system's resolution over its full range of motion.
Specifications:
Analog I/Os:
0 to 10V output with 12 to 30V input, 35 mA max;
4 to 20 mA (3-wire) output with 18 to 30V input, 60 mA max at 75°C (167°F max)
Measuring Range: 6 to 100 mm (0.25 to 4") full scale
Linearity Error: ±0.15% of Full Scale Output (FSO) typical, ±0.25% max
Resolution: 0.025% of FS
Update Rate: 300 Hz nominal
Operating Temperature: -20 to 85°C (-4 to 185°F)
Temperature Coefficient: 0.015% of FS/degree°C
Vibration: 5 to 20 Hz, 0.5" p-p; 20 to 2000 Hz, 4.2 g p-p
Shock: 1000 g, 11 ms
Terminations: IP67
Humidity: 95% RH, non-condensing
Housing Material: Stainless steel
LDI-G19-013-A220S_LDI-G19-075-A220S位移传感器OMEGA
非接触操作防止抖动或循环磨损
优秀的笔画长度比
坚固的19 mm(0.75”)直径不锈钢外壳
场可调范围缩放
范围广泛:6.25至100毫米(1/4英寸至4英寸)满标度
设计用于在不利的温度、振动、冲击和湿度条件下运行
应用
工厂自动化系统
PLC位置反馈
试验和测量
包装设备
工厂自动化
原始设备制造商试验台
ldi-g19系列的lvit(线性可变电感传感器)弹簧加载位置传感器是一种非接触式装置,用于qa实验室的尺寸测量,或工厂自动化系统和各种工业和商业应用中的位置测量。例如汽车测试、MIL/航空测试台、机械臂和包装设备,其中传感元件不能连接到被测物体上。LDI-G19S的标称满标度范围为6.35至100 mm(0.25至4.0“),具有出色的分辨率和高的行程与车身长度比。被测物体的最大尖端接触力为1磅。
LDI-G19传感器有一个直径为19 mm(0.75”)的铝或不锈钢主体,带有一个1/2-20 UNF-2A螺纹38 mm(1.5”)和两个19 mm(0.75”)六角锁紧螺母,用于代替弹簧加载的直流LVDT测头的嵌入式安装。这些传感器使用配备有9号触点的探针,并配有一个PT02-10-6P连接(配套接头单独出售)。这些传感器可在各种直流电压下工作,可选择四个模拟输出中的一个。校准和设置通过一个线场编程功能简化,这提供了将传感器模拟输出的端点与传感器连接到的组件运动范围的端点相匹配的能力。此功能允许用户在整个运动范围内优化位置测量系统的分辨率。
LDI-G19-013-A220S_LDI-G19-075-A220S位移传感器OMEGA