DPG4000-1_DPG4000-3K_DPG4000-1K-DC数字压力表OMEGA

DPG4000-1_DPG4000-3K_DPG4000-1K-DC数字压力表OMEGA

DPG4000-1_DPG4000-3K_DPG4000-1K-DC数字压力表OMEGA

标配RS232通讯端口

精度极高：满量程的±0.05%

随附NIST校准证书

带温度补偿：0 ～ 50°C

以18种标准或定制工程单位进行显示

以°C或°F显示环境温度

大型背光5位数显示屏，数字高度16.5 mm (0.65")，带有20段条形图

紧固的不锈钢外壳达到NEMA 4 (IP65)防护等级

最小值/最大值调用

可调去皮零点大系统偏移

用户可配置的采样率，最大程度上提高测量性能和电池寿命

用户可配置的阻尼，让脉动源的读数平稳

自动关闭功能，延长电池寿命

低电量指示器

提供可选的24 V 外部电源输入

可选后部压力端口

DPG4000-1_DPG4000-3K_DPG4000-1K-DC数字压力表OMEGA

Specifications:

(0-50 degrees C, unless otherwise specified)

Accuracy: Full range (+0.05%) and Full range (+0.1%).

Temperature Compensation: 0-50 degree C (32-122 degree F) to achieve rated accuracy

Stress tolerance: see specification sheet

Fracture Pressure: See Specification Table

Note: DPG4000 positive pressure models with 100 psig range should not be used for vacuum measurement. - 5 psig vacuum will cause permanent damage to sensors on low voltage models. Compound range model can be used to measure vacuum. Vacuum can be used in the range of 300 psi and 500 psig without damage.

Standard engineering units: psi, bar, kg/cm 2, inH_2 (4 degrees C, 20 degrees C or 60 degrees F), ftH_2 (4 degrees C, 20 degrees C or 60 degrees F), cmH_2 (4 degrees C and 20 degrees C), kPa, mbar, inHg, mmHg, Torr

Medium compatibility: liquid and gas compatible with 316 stainless steel

Operating temperature: - 10-55 degrees C (14-131 degrees F)

Storage temperature: -20-70 C (-4-158 F)

Size: 111.1 x 127 x 38.1 mm (4.375 x 5 x 1.50")

Input Port: Installation of MNPT Lower Part

Display screen: 5 digits, 16.5 mm (0.65") high

Bar chart: 0-100%, divided into 20 sections

Power supply: 3 "AA" alkaline batteries (including); 24 Vdc power supply is optional

Battery life: 1500 hours without backlight (2000 hours at low sampling rate)

Low Volume Indicator: Show icons near the end of battery life; Show remaining battery life on bar chart.