来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

AED
现在位置首页>计量器具>力学测量器具>推拉力计>现货WTT电线终端测试仪 - 拉力测试仪
现货WTT电线终端测试仪 - 拉力测试仪
现货WTT电线终端测试仪 - 拉力测试仪
  • 现货WTT电线终端测试仪 - 拉力测试仪

现货WTT电线终端测试仪 - 拉力测试仪

产品报价:询价

更新时间:2023/4/3 18:11:18

地:其他国家

牌:abqindustrial

号:WTT

厂商性质: 生产型,

公司名称: 世联博研(北京)科技有限公司

产品关键词: 电线终端测试仪 - 拉力测试仪   WTT   Wire Terminal Tester   Pull Tester   abqindustrial  

812
访问人数
0
累计评论


王荣 : (18618101725) (18618101725)

(联系我时,请说明是在来宝网上看到的,谢谢!)


WTT Wire Terminal Tester - Pull Tester

WTT电线终端测试仪 - 拉力测试仪


The WTT has been replaced by the new and improved WT3-201
Wire Terminal Tester Pull Tester
Range: 0-110 lbs / 0-50 Kg / 0-500N
Measures Peak Pull Force required to remove wire terminal

Two Models Available
WTT-110B, 0-50 Kg / 0-110lbs / 0-500 N
WTT-220X, 0-100Kg /0-220lbs / 0-1000N

The WTT Series of Wire Terminal Testers accurately measures the pull-off force off crimped-on wire terminals. The pull tester is an easy to use all-in-one, single-range solution for a wide range terminal testing applications, eliminating the need to purchase any additional grips, fixtures or accessories.

Suitable for wires AWG 30 to AWG 8 (diameters from 0.010" to 0.130").

WTT-220X version includes USB Output and is supplied with data transfer cable and software allowing the user to transfer peak values to a PC for data reporting. Additional software features include user-set limit for audible alarm as limit is-exceeded.

WTTM-220X Software is compatible with Windows XP and Windows 7, it is not compatible with Windows 8. It also Requires Microsoft Excel

line
Photo Gallery
line

ABQ ABQ ABQ ABQ ABQ ABQ ABQABQ ABQ ABQ ABQ ABQ

line
Features 
line

  • Display force values in peak or real-time measuring mode

  • Test for UL 486 & Mil Spec and other standards

  • Fabricated from steel and stainless steel, machined to the highest tolerances

  • Includes Traceable Calibration Certificate

lineForce Rangesline

  1. Press START key to turn on your WTT-110B/220X Wire Terminal Tester

  2. Press UNITS key to select desired measuring units LB / N / KG

  3. Press PEAK key to select peak or real-time measuring mode

  4. Insert wire sample into the appropriate size wire terminal slot

  5. Open lever-clamp assembly and insert tail end of wire

  6. Press START key to zero display and enter “live” measuring mode

  7. Pull lever to apply force to wire and perform wire terminal pull out force measurement

  8. The “live” measurement mode will time out 5 seconds after pressure is released

  9. Repeat from step 4 for continued testing

lineDimensionsline

  1. Remove the lever by unscrewing it in a counter-clockwise direction and move the Wire Clamp assembly out from the path of the hanging sample.

  2. Position the WTT-110B/220X in a vertical position at the edge of a strong bench or desk. Be sure to secure it with strong clamps so it can not topple over when the weight is attached.

  3. Turn on tester and set the display to track mode.

  4. Press START to activate measurement mode (it times out in 5 seconds if load is not sensed)

  5. Using a heavy-duty monofilament (fishing line), wire or similar, suspend a known weight from one of the teeth on the wire terminal fixture by hooking a loop of the material over the selected tooth.

lineSpecificationsline

Measuring RangeWTT-110B: 0-50 Kg / 0-110 lbs / 0-500N
WTT-220X: 0-100 Kg / 0-220 lbs / 0-1000N
Resolution0.01 Kg / 0.1 lbs / 0.1 N
Terminal Adapter Slot width (mm)0.5, 0.8, 1.0, 1.4, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0
Accuracy±0.5% F.S. or better
Operating ModeContinuous:
Displays actual value in Kg, lbs pr N
Peak-Hold:
Displays peak value in Kg, lbs pr N
Wire DiameterSAE AS7928 II: AWG 8...30
IEC 60352-2: Cross section 0.05...10mm2
Maximum: 0.236" (6mm)
Overload200% Full Scale (LCD indicator at 120%)
DisplayLCD, 4-1/2 digit, 12mm high
MemoryPeak Value
Power SupplyInternal Solar Cell, external power is not required
Temp. RangeOperating: 32 to 104° F (0 to 40° C)
Storage: -4 to 140° F (-20 to 60° C)
Weight30.8 lbs (14 Kg) (Shipping weight 37lbs)
Dimensions14.2" x 6.3" 2.6" (360 x 160 65mm)
MaterialAnodized aluminum, steel and stainless steel
Warranty1 Year


line
Complete Kit
line

The WTT-110B is supplied as a Complete kit that includes wire pull tester, operating instructions & Traceable certificate.

The WTT-220X includes everything listed above along with USB output cable and software CD

complete kit

line
Related Products
line

WT3-200
Wire Terminal Pull Tester

  • Measures real-time and peak force values

  • USB, RS-232, Mitutoyo (Digimatic), and analog outputs

related

line

WTT-ESM
Motorized Wire Terminal Tester

  • LCD display with UP, DOWN, STOP and emergency stop buttons and soft keys

  • Integrated travel limit switches

  • 3 Year Warranty

  • CE Certified

related

line

WTTM
Motorized Wire Crimp Pull Tester

  • Simple and intuitive operation allows for high volume testing

  • Break-detection automatically resets system after sample fails

related

line

WTT-CC
Carrying Case

related

现货WTT电线终端测试仪 - 拉力测试仪现货WTT电线终端测试仪 - 拉力测试仪现货WTT电线终端测试仪 - 拉力测试仪

世联博研(北京)科技有限公司

| 第14

手机:18618101725

联系人:王荣

电话:18618101725

传真:010-67529703

QQ:736597338

(联系我时,请说明是在来宝网上看到的,谢谢!)