The TI-MMX-SDL High Performance Data-Logging Thickness Gauge is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The TI-MMX-SDL High Performance Data-Logging Thickness Gauge features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. Features
The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. Built in hardware AGC gain control for through paint measurements in multi mode operation. The TI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location. CE Certified Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated. The TI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge also comes complete with our Windows? PC software for transferring data to and from a PC. The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned. Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view. Includes NIST Calibration Certificate 2 Year Warranty
Specifications Range in Steel | Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thickness of the coating. | Resolution | .001 inches (0.01mm) | Velocity Range | .0492 to .3936 in./ms 1250 to 9999 meters/sec | Units | English & Metric | Measurement Modes | Pulse-Echo (flaws, pits) Echo-Echo (thru-paint) | Transducer Types | Dual Element (1 to 10 MHz). | Memory | 16 megabit non-volatile ram | Memory capacity | 12,000 pages with 1 reading and waveform per page | Power Source | Three 1.5V alkaline or 1.2V NiCad AA cells | Battery Life | Typically operates for 150 hours on alkaline and 100 hours on NiCad | Auto Power off | if idle 5 min | Display | 1/8 in. VGA grayscale display 62 x 45.7mm | Keyboard | Membrane switch with twelve tactile keys | Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). | Operating Temperature | -14° to 140°F (-10° to 60°C) | Weight, net | 383 grams | Dimensions | 63.5 W x 165 H x 31.5 D mm | Warranty | 2 year limited | Certification | CE Approved, Factory calibration traceable to national standards |
Complete Kit
The TI-MMX-SDL High Performance Data-Logging Wall Thickness Gauge is supplied as a complete kit with the gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. TRANSDUCER SOLD SEPERATELY Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available | |
Uncertified Steel Test Block For Ultrasonic Gauges | |
TICC-MVX Protective Holder for Ultrasonic Gauges | |
CF12 Coupling Fluid
| |
V-Block Transducer Holder
| |
|