The new CHECKLINE? CMX measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the CMX automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating. Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). Five user-selected operating modes are included: Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness. Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only. Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature. Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included) Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating. Features
Hardware AGC gain control for multiple echo and thru-paint measurement. 2 year limited warranty Multiple calibration options: One Point, Two Point, or selection from a Material List. PVX comes complete with our Windows? PC software for transferring data to and from a PC. 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications. User-selected resolution of 0.001" or 0.0001" inch units and 0.01 or 0.001 in mm units PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. Visual and audible alarm with hi and lo limit settings for specific application tolerances. The high speed scan feature 1/4" 15MHz Delay Line Probe p/n T-481-5507 also available when pencil probe is not needed. Specify TI-PVX-5507 to order as complete kit with this probe Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view. Includes NIST-Traceableb calibration certificate CE Certified
High Speed Scan Mode & B-Scan Mode
Hi-Speed Scan Mode
| |
B-Scan Mode
| |
Measuring Limits | Minimum Radius for Convex Surfaces | 1" (25.4 mm) | Minimum Radius for Concave Surfaces | 3" (76.2 mm) | | Minimum Headroom | 3" (76.2 mm) | | Minimum Sample Diameter | 0.5" (12.7 mm) | | Minimum Substrate Thickness - F | na | Minimum Substrate Thickness - NFe | na |
Specifications
Range in Steel | Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick | Range in Coating Only Mode | 0.0005" - 0.1000" / Resolution: 0.0001" (0.013 - 2.540 mm / Resolution: 0.001 mm) | Max Coating | 0.100" (2.54mm) | Resolution | .001 inches (0.01mm) | Velocity Range | .0492 to .3936 in./ms 1250 to 9999 meters/sec | Units | Inch or mm | Measurement Modes | - Pulse-Echo (corrosion mode) - Pulse-Echo Coating (Corrosion w/o coating) - Echo-Echo (thru-paint) - Temp Comp (auto adjust for material temp) - Coating Only (Ultrasonic Coating Gauge) | Transducer Types | Dual Element (1 to 10 MHz). | Output | RS-232 for upload/download of setups | Memory capacity | TI-CMX: None TI-CMXDL: over 200,000 measurements | Power Source | Three 1.5V alkaline or 1.2V NiCad AA cells | Battery Life | Typically operates for 150 hours on alkaline and 100 hours on NiCad | Auto Power off | After 5 minutes of non-use | Display | 1/8 in. VGA grayscale display 62 x 45.7mm | Keyboard | Membrane switch with twelve tactile keys | Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). | Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C) Special high temperature model TI-CMX-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures | Weight, net | 383 grams | Dimensions | 63.5 W x 165 H x 31.5 D mm | Warranty | 2 year limited | Certification | CE Approved, Factory calibration traceable to national standards |
Complete Kit
The CMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, operating manual, RS-232 cable and software — all in a foam-fitted carrying case. Related Products NIST-Traceable Steel Test Block 3 Sizes Available | |
DataComm Software for Thickness Gauges | |
CF12 Coupling Fluid
| |
TICC-M Protective Holder for Ultrasonic Gauges | |
Uncertified Steel Test Block For Ultrasonic Gauges | |
CF-2H High Temperature Coupling FluidTemperature Range 0° to 600° F -18° to 315° C
| |
CF-4H-950F High Temperature Coupling Fluid | |
TI-CMX-UW-50 50 Foot Underwater Probe / Cable Assembly | |
V-Block Transducer Holder
| |
|