王荣 : (18618101725) (18618101725)
（联系我时，请说明是在来宝网上看到的，谢谢！）CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge
CMXDL数据记录超声波涂层和壁厚测量仪
Range: 0.025 - 9.999 inches - 0.63 - 254.0 mm
Resolution: .001" (0.01 mm)
Datalogging: YES
| The new CHECKLINE? CMXDL measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the CMXDL automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coatingOversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).Five user-selected operating modes are included:Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coatingSpecial FeaturesBuilt-in memory with RS-232 output for transferring data to a Printer or PCIncludes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column Each "grid type" File can be set for up to 999 rows by 52 columns Each "sequential" File can be set for up to 512 rows by 1 columnEach File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scanFeaturesAuto probe recognition with Auto Zero or Manual Zero.Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).Wide variety of dual-element probes can be used for nearly any application.64 custom setups can be stored and retrieved for convenient use and labeled for easy identificationBar graph with user-set start end values providing highest resolution around the target thickness value.Display Hi/Lo Alarm Limits with audible and visual indicators.Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.2 Year Warranty & CE-CertifiedIncludes NIST-Traceable Calibration.Metal housing provides strong protection against harsh environments.TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offeredMeasures Coatings up to 0.100"High Speed Scan Mode & B-Scan ModeHi-Speed Scan ModeScan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is offB-Scan ModeThe B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to leftMeasuring LimitsMinimum Radius for Convex Surfaces0.350" (8.89 mm)Minimum Radius for Concave Surfaces3" (76.2 mm)Minimum Headroom1" (25.0 mm)Minimum Sample Diameter0.150" (3.8 mm)Minimum Substrate Thickness - FnaMinimum Substrate Thickness - NFenaSpecificationsRange in SteelPulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickRange in Coating Only Mode0.0005" - 0.1000" / Resolution: 0.0001"(0.013 - 2.540 mm / Resolution: 0.001 mm)Max Coating0.100"Resolution.001 inches (0.01mm)Velocity Range.0492 to .3936 in./ms1250 to 9999 meters/secUnitsInch or mmMeasurement Modes- Pulse-Echo (corrosion mode)- Pulse-Echo Coating (Corrosion w/o coating)- Echo-Echo (thru-paint)- Temp Comp (auto adjust for material temp)- Coating Only (Ultrasonic Coating Gauge)Transducer TypesDual Element (1 to 10 MHz).OutputRS-232 for upload/download of setupsMemory capacityTI-CMX: NoneTI-CMXDL: over 200,000 measurementsPower SourceThree 1.5V alkaline or 1.2V NiCad AA cellsBattery LifeTypically operates for 150 hours on alkaline and 100 hours on NiCadAuto Power off:After 5 minutes of non-useDisplay1/8 in. VGA grayscale display 62 x 45.7mmKeyboardMembrane switch with twelve tactile keysCaseExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed).Temp. LimitsAmbient: -20 to 120° F (-30 to 50° C)Material: -0 to 200° F (-20 to 100° C)Special high temperature model TI-CMXDL-H is available for 300°F/150°C and optional probes are offered for higher surface temperaturesWeight, net383 gramsDimensions63.5 W x 165 H x 31.5 D mmWarranty2 year limitedCertificationCE Approved, Factory calibration traceable to national standardsComplete KitThe CMXDL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, operating manual, RS-232 cable and data-transfer software —all in a foam-fitted carrying caseRelated ProductsNIST-Traceable Steel Test Block3 Sizes AvailablePrecision Machined and FinishedIncludes NIST Report and Test DataDataCommSoftware for Thickness GaugesCF12Coupling FluidUsed to create an ultrasonic coupling between the probe and material to be measured12 oz BottleTICC-MProtective Holder for Ultrasonic GaugesConstructed from heavy duty Cordura NylonBuilt-in belt loopUncertified Steel Test BlockFor Ultrasonic GaugesFor convenient confirmation of thickness gauge calibrationCF-2HHigh Temperature Coupling FluidTemperature Range0° to 600° F-18° to 315° CCF-4H-950FHigh Temperature Coupling FluidTemperature Range: 600-950 °F/316-510 oCTI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectorsV-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas |
现货CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge现货CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge现货CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge
