来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

AED
现在位置首页>物性测试仪器>无损检测仪器/设备>超声波测厚仪>现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness
现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness
现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness
  • 现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness

现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness

产品报价:询价

更新时间:2023/4/3 18:11:18

地:其他国家

牌:abqindustrial

号:TI-25DL-MMX

厂商性质: 生产型,

公司名称: 世联博研(北京)科技有限公司

产品关键词: Ultrasonic Thickness   Data Logging Through Paint   数据记录通过油漆超声波厚度   TI-25DL-MMX   abqindustrial  

387
访问人数
0
累计评论


王荣 : (18618101725) (18618101725)

(联系我时,请说明是在来宝网上看到的,谢谢!)


TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness

TI-25DL-MMX数据记录通过油漆超声波厚度


Measures on coated materials and eliminates the coating from the measurement with datalogging

Range: Pulse-Echo Mode (Pit & Flaw Detection) 0.025 - 19.999 inches0.63 - 500 mm - Echo-Echo Mode (Through Paint & Coatings) 0.1 - 1 inch 2.54 - 25.4 mm


Resolution: .001" (0.01 mm) 

Datalogging: YES

Measuring Range in Steel

Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).

Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).

The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

line
Photo Gallery
line

ABQ ABQ ABQ ABQ ABQ

line
Features
line

  • Ability to measure through paint and eliminate coatings

  • Resolution of 0.001 inch (0.01 mm)

  • Large, backlit LCD display retains last reading

  • Simple operator controls virtually eliminate training

  • RS-232C Serial output for downloading stored data to a printer or computer

  • Memory for 1000 data points in up to 10 batches

  • Special-purpose probes are offered for a variety of applications

  • Switch-selected units for inches or mm

  • For underwater surveying, probe cable lengths up to 50 feet are optionally

  • CE Certified

  • Includes NIST Calibration Certificate

lineTypical Applicationsline

typical

lineMeasuring Limitsline

Minimum Radius for Convex Surfaces0.350" (8.89 mm)
Minimum Radius for Concave Surfaces3" (76.2 mm)
Minimum Headroom1" (25.0 mm)
Minimum Sample Diameter0.150" (3.8 mm)
Minimum Substrate Thickness - Fna
Minimum Substrate Thickness - NFena


lineSpecificationsline

RangePulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
Resolution.001" (0.01 mm)
Display4? - Digit, 0.5" Backlit LCD
Velocity Range0.0492 to .3937 in./μs. (1250 to 10,000 meters/second)
Probe5 MHz, 0.25" Diameter (6.35 mm)
Probe WearfacePEEK (Polyethlethylketone)
Cable4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Temp. LimitsAmbient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery TypeTwo AA batteries
Battery Life200 hours
Weight7 ounces (196 g)
Size2.5 x 4.5 x 1.25" (64 x 114 x 32 mm)
Accessories IncludedProbe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. 
WarrantyGauge: 5 Years
Probes: 90 Days


lineModel Selection Guideline

Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode

Model NumberMaximum CoatingMinimum WallMaximum Wall
All Models0.020" (0.50mm)0.100" (2.54mm)6.000" (152.4mm)

Selection Guide - Thru-Paint (Echo-Echo) Model

Model NumberMaximum CoatingMinimum WallMaximum Wall
TI-25M-MMX0.040" (1.00mm)0.100" (2.54mm)1.000" (25.4mm)
TI-25M-MMX-EXT0.080" (2.00mm)0.200" (5.08mm)5.000" (127.0mm)


lineComplete Kitline

The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

lineOptional Accessoriesline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished

  • Includes NIST Report and Test Data

line

Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration

line

TICC-M
Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon

  • Built-in belt loop

line

CF12
Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured

  • 12 oz Bottle

line

V-Block
Transducer Holder

  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas

现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness现货TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness