来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

AED
现在位置首页>物性测试仪器>表面物性测试仪>可焊性测试仪>现货N88-PW-D Pipeline Weld Supervisors Kit
现货N88-PW-D Pipeline Weld Supervisors Kit
现货N88-PW-D Pipeline Weld Supervisors Kit
  • 现货N88-PW-D Pipeline Weld Supervisors Kit

现货N88-PW-D Pipeline Weld Supervisors Kit

产品报价:询价

更新时间:2023/4/3 18:11:18

地:其他国家

牌:abqindustrial

号:N88-PW-D

厂商性质: 生产型,

公司名称: 世联博研(北京)科技有限公司

产品关键词: Supervisors Kit   Pipeline Weld   N88-PW-D   abqindustrial   现货  

920
访问人数
0
累计评论


王荣 : (18618101725) (18618101725)

(联系我时,请说明是在来宝网上看到的,谢谢!)


N88-PW-D Pipeline Weld Supervisors Kit

N88-PW-D管道焊接监督工具包


N88-PW-D Pipeline Weld Supervisors Kit

Western’s personnel have many combined years of experience in the Pipeline Construction Industry. Therefore, many of the procedures and problems associated with pipeline construction are not foreign to us. Pipeline Welding Supervisors and Consultants, are regularly ordering two different instruments from us; a Reaching Pit Gauge, and our W-FI-10 Magnetic Field Indicators. As illustrated below, both of these instruments are packaged in the same latched wooden storage box

The Reaching Pit Gauge has been selected because Yellow Jacket (and other coatings typically end far enough-back from the weld that the coatings don’t interfere with the Reaching Blade sitting flat on the Pipe surface The cutaway nose, on the dial indicator end of blade, permits positioning the Dial or Digital Indicator’s Contact Point on either side of the weld.

The Reaching Pit Gauge is used to measure weld undercut, end alignment differences across the weld as well as Mill Marks. Excessive Undercut creates an area for stress concentrations, and possible cracking. Pipe alignment is necessary to ensure good weld geometry, which when not achieved, will create problems with Automatic Welding Systems. Mill Marks are a polite way of describing grinding repairs, to ensure to much material was not removed and there is enough remaining wall thickness. The same politically correct terminology is used to describe damage that can often happen when positioning the weld or moving pipe within, the bender

The W-FI-10’s are used to test for residual magnetism in the Weld. Experienced Welders know that when the beveled end of a pipe has a magnetic field over 10 Gauss, welds will be rejected by either UT or X-Ray.

Western and our Stocking Distributors can save you a little money, and give you all the versatility you need for either Corrosion, Equipment, or Weld Inspection. Let us assemble an Inspection Kit for you today.

现货N88-PW-D Pipeline Weld Supervisors Kit现货N88-PW-D Pipeline Weld Supervisors Kit现货N88-PW-D Pipeline Weld Supervisors Kit