The WD-Series Magnetizing Coils are designed specifically for Magnetic Particle Inspection, and have grown in popularity from the Oil Country Tubular Goods Inspection Industry. Drill Pipe, Couplings and other Drilling Tools are regularly inspected for Transverse Cracks, which are normally found in the last engaged thread. These inspections are often performed in the Field, but are just as common in manufacturing and repair facilities. The WD-Series are available in 5 Models, with their Model Number designation in ID size: WDV-8 (8-5/8”/219mm ID) WDV-10 (10-?”/273mm ID) WDV-14 (14”/356mm ID) WDV-16 (16”/406mm ID) WDV-25 (25”/635mm ID)
WDV-8 ,10, & 14 are available in 115Volt/60Hz and 230Volt/50Hz Models. WDV-16 and 24 are available in 220 Volt/60Hz and 230Volt/50Hz Models. All Models are Available with our exclusive AC Option The WDV Power Supplies offer the operator Infinite Variable Control on the DC Output of the Coil. All WD-Series Coils have a DC output greater than 10,000 Amp Turns, meeting the most stringent specifications. WDV-Series Coils have gained a very favorable, World wide, reputation for their manual Reversing DC Demagnetization capability. Reversing DC Demag is accomplished by Revising the Polarity Switch, Reducing the Amperage followed by a brief shot, by Energizing the Coil. This Reducing - Reversing step is repeated, until the Field is reduced to a desirable level. The AC Option would be selected if the operator wants to Demag small parts, or must inspect in an active AC Field. WDV-AC Coils typically provide an AC field well over 4000 Amp Turns. Photo Gallery
Features
DC Magnetization Reversing DC Demagnitization Variable Output 0-10,000 Amp-turns Digital Amp Meter - Constant Reading Solid State Electronic Controls Fully Self Contained - No External Power Supply
Specifications
Models | All sizes of WDV or WDP Series Coils | Voltage | 115VAC or 230VAC (Nominal) | Current | WDV - 0 to 20 Amps (Model Dependent) | Capacity | WDV - 0 to 16,000 Amp-Turns (Model Dependent) WDP - 10,000 Amp-Turns (min. values) | Frequency | 50 or 60Hz | Size | 8.5”, 10.5”,14”, 16” 25” ID Min. | Weight | Model & Size Dependant 23 to 52lbs. (10.5-23.6kg) |
*Standard Voltage is 115 VAC, 230 VAC is optional. *Options; Cast Feet; and Removable Power Cord, ID Wear Bars, AC Output, Foot Switch. *Separate Power Supplies are available for retrofitting coils. |