来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>自动化仪器仪表>传感器/变送器>压力传感器> 美国Dwyer德威尔2913-E_2916-E电流压力传感器

商品编号:75551
分享

美国Dwyer德威尔2913-E_2916-E电流压力传感器

价    格:询价

产    地:美国更新时间:2019/10/9 16:57:33

品    牌:德威尔型    号:2913-E

状    态:正常点击量:15

15221105376
联系我时,请说明是在来宝网上看到的,谢谢!

上海茂培电子科技有限公司

联 系 人:范先生

电     话:15221105376

传     真:

等     级: (第 4年)

性     质:贸易型,

联系我时请说在来宝网上看到的,谢谢!




美国Dwyer德威尔2913-E_2916-E电流压力传感器

Service: Oil free, clean dry air filtered to 40 microns.

Input Signal: 4 to 20 mA.

Air Supply: Min: 5 psig (0.3 bar) above max output; Max: 100 psig (6.9 bar).

Output: 3 to 15 psig (0.2 to 1.0 bar), 6 to 30 psig (0.4 to 2.1 bar).

Accuracy: ±0.1% of span.

Hysteresis: ±0.1% of span.

Repeatability: ±0.1% of span.

Deadband: 0.02% of span.

Power Requirement: Loop powered.

Temperature Limits: Operating: -40 to 160°F (-40 to 71°C); Storage: -40 to 200°F (-40 to 93°C).

Pressure Connections: 1/4? FNPT.

Electrical Connection: 1/2? FNPT.

Air Consumption: 0.05 scfm (0.02 l/s) at midrange typical.

Output Capacity: 4.5 scfm (2.1 l/s) at 25 psig (1.7 bar) supply; 12.0 scfm (5.7 l/s) at 100 psig (6.9 bar) supply.

Enclosure: Chromate-treated aluminum with epoxy paint.

Enclosure Rating: Weatherproof NEMA 4X (IP66), explosion-proof and intrinsicallysafe.

Weight: 1.8 lb (0.82 kg).

Agency Approvals: CE, CSA, FM.

FM Ratings: Explosion-proof for Class I Division 1, Groups B, C, and D. T6, Dust

Ignitionproof for Class I, Division 1, Groups E, F, and G, T6; Intrinsically safe for

Class I, II, and III, Division 1, Groups C, D, E, F, and G, T4 hazardous (classified)

locations and intrinsically safe for Class I, Zone 0, Group IIB, T4 hazardous

(classified) locations and suitable for Class I, Groups A, B, C, D, T4, and Class II

and III, Division 2, Groups F and G, T6 hazardous (classified) locations.

CSA Ratings: Class I Division 1, Groups B, C, and D; Class I, Division 2, Groups

A, B, C and D; Class II, Division 1, Groups E, F, and G; Class II and III, Division 2,Groups F and G.



产品参数

美国Dwyer德威尔2913-E_2916-E电流压力传感器

Service: Oil free, clean dry air filtered to 40 microns.

Input Signal: 4 to 20 mA.

Air Supply: Min: 5 psig (0.3 bar) above max output; Max: 100 psig (6.9 bar).

Output: 3 to 15 psig (0.2 to 1.0 bar), 6 to 30 psig (0.4 to 2.1 bar).

Accuracy: ±0.1% of span.

Hysteresis: ±0.1% of span.

Repeatability: ±0.1% of span.

Deadband: 0.02% of span.

Power Requirement: Loop powered.

Temperature Limits: Operating: -40 to 160°F (-40 to 71°C); Storage: -40 to 200°F (-40 to 93°C).

Pressure Connections: 1/4? FNPT.

Electrical Connection: 1/2? FNPT.

Air Consumption: 0.05 scfm (0.02 l/s) at midrange typical.

Output Capacity: 4.5 scfm (2.1 l/s) at 25 psig (1.7 bar) supply; 12.0 scfm (5.7 l/s) at 100 psig (6.9 bar) supply.

Enclosure: Chromate-treated aluminum with epoxy paint.

Enclosure Rating: Weatherproof NEMA 4X (IP66), explosion-proof and intrinsicallysafe.

Weight: 1.8 lb (0.82 kg).

Agency Approvals: CE, CSA, FM.

FM Ratings: Explosion-proof for Class I Division 1, Groups B, C, and D. T6, Dust

Ignitionproof for Class I, Division 1, Groups E, F, and G, T6; Intrinsically safe for

Class I, II, and III, Division 1, Groups C, D, E, F, and G, T4 hazardous (classified)

locations and intrinsically safe for Class I, Zone 0, Group IIB, T4 hazardous

(classified) locations and suitable for Class I, Groups A, B, C, D, T4, and Class II

and III, Division 2, Groups F and G, T6 hazardous (classified) locations.

CSA Ratings: Class I Division 1, Groups B, C, and D; Class I, Division 2, Groups

A, B, C and D; Class II, Division 1, Groups E, F, and G; Class II and III, Division 2,Groups F and G.

 

介质:无油,清洁干燥空气过滤至40微米。

输入信号:420毫安。

供气:最小值:高于最大输出值5 psig0.3 bar);最大值:100 psig6.9 bar)。

输出:315 psig0.21.0 bar)、630 psig0.42.1 bar)。

精度:量程的±0.1%

滞后:量程的±0.1%

重复性:量程的±0.1%

死区:量程的0.02%

电源要求:回路供电。

温度限制:工作温度:-40160°F-4071°C);储存温度:-40200°F-4093°C)。

压力连接:1/4 FNPT

电气连接:1/2 FNPT

空气消耗:典型中档时为0.05 scfm0.02 l/s)。

输出容量:25 psig1.7 bar)电源时为4.5 scfm2.1 l/s);100 psig6.9 bar)电源时为12.0 scfm5.7 l/s)。

外壳:铬酸盐处理的铝和环氧漆。

外壳等级:耐候NEMA 4XIP66),防爆,本质安全。

重量:1.8磅(0.82千克)。

机构批准:CECSAFM

FM等级:I1BCD组防爆。T6,粉尘

I级,1区,EFG组,T6的防爆;本质安全

IIIIII级,1类,CDEFG组,T4危险(分类)

I0IIBT4危险场所和本质安全

(分类)位置,适用于I类,ABCDT4II

III2区,FG组,T6危险(分类)位置。

CSA评级:I级,1级,BCD组;I级,2级,组

ABCDII级,1区,EFG组;II级和III级,2区,FG组。



产品介绍

美国Dwyer德威尔2913-E_2916-E电流压力传感器

介质:无油,清洁干燥空气过滤至40微米。

输入信号:420毫安。

供气:最小值:高于最大输出值5 psig0.3 bar);最大值:100 psig6.9 bar)。

输出:315 psig0.21.0 bar)、630 psig0.42.1 bar)。

精度:量程的±0.1%

滞后:量程的±0.1%

重复性:量程的±0.1%

死区:量程的0.02%

电源要求:回路供电。

温度限制:工作温度:-40160°F-4071°C);储存温度:-40200°F-4093°C)。

压力连接:1/4 FNPT

电气连接:1/2 FNPT

空气消耗:典型中档时为0.05 scfm0.02 l/s)。

输出容量:25 psig1.7 bar)电源时为4.5 scfm2.1 l/s);100 psig6.9 bar)电源时为12.0 scfm5.7 l/s)。

外壳:铬酸盐处理的铝和环氧漆。

外壳等级:耐候NEMA 4XIP66),防爆,本质安全。

重量:1.8磅(0.82千克)。

机构批准:CECSAFM

FM等级:I1BCD组防爆。T6,粉尘

I级,1区,EFG组,T6的防爆;本质安全

IIIIII级,1类,CDEFG组,T4危险(分类)

I0IIBT4危险场所和本质安全

(分类)位置,适用于I类,ABCDT4II

III2区,FG组,T6危险(分类)位置。

CSA评级:I级,1级,BCD组;I级,2级,组

ABCDII级,1区,EFG组;II级和III级,2区,FG组。




猜你喜欢