来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>自动化仪器仪表>传感器/变送器>温度传感器> PR-26SL-3-100-A-0600-M12-1_PR-26SL-3-100-A-0900-M1

商品编号:74377
分享

PR-26SL-3-100-A-0600-M12-1_PR-26SL-3-100-A-0900-M1

价    格:询价

产    地:美国更新时间:2019/9/11 7:42:53

品    牌:欧米茄型    号:PR-26SL

状    态:正常点击量:29

15221105376
联系我时,请说明是在来宝网上看到的,谢谢!

上海茂培电子科技有限公司

联 系 人:范先生

电     话:15221105376

传     真:

等     级: (第 4年)

性     质:贸易型,

联系我时请说在来宝网上看到的,谢谢!




PR-26SL-3-100-A-0600-M12-1_PR-26SL-3-100-A-0900-M12-1温度RTD传感器OMEGA

PR-26SL传感器总成设计用于安装一个热电偶套管,其杆长等于型号中规定的长度。只需将传感器组件滑入热电偶套管,直到底部,然后在进行1/2NPT连接的同时压缩弹簧。可在1/2NPT安装螺纹上使用螺纹密封剂带或螺纹化合物,以确保以后易于拆卸。自持弹簧的位置也可以调整,以便传感器可以在较短的热电偶套管中使用,只需在沿着探针杆滑动弹簧的同时扭转弹簧,直到达到所需的位置。


产品参数

PR-26SL-3-100-A-0600-M12-1_PR-26SL-3-100-A-0900-M12-1温度RTD传感器OMEGA

订购PR-26SL传感器时,不要忘记延长电缆。欧米茄提供多种延长电缆,包括成型PVC、LCP/PFA、聚氨酯和硅树脂电缆,以及各种电缆材料的定制电缆,可选不锈钢编织或软管,以提高机械保护。欧米茄还提供一系列可编程和固定范围的发射机,配有M12接口,以及多种控制器、面板仪表和其他仪器,以满足您的测量需求。




规格:


金属件:316L不锈钢外壳。




接头:4针“A”编码的M12插头。




标准探头直径:1/4”




标准探针长度:见下表中的热电偶套管杆长度。




传感器:PT100(0°C时100欧姆,.00385 tcr(alpha))标准,PT1000和其他选项



产品介绍

PR-26SL-3-100-A-0600-M12-1_PR-26SL-3-100-A-0900-M12-1温度RTD传感器OMEGA

4-Wire, Class-A Pt100 RTDs Can be Used with 2, 3 or 4-Wire Systems

Temperature Range: -50 to 500°C (-58 to 932oF) [250°C (482oF) Max at Connector]

M12 A-Coded Male Connectors for Easy Installation, 2 Wiring Arrangements Available

Fits All Standard 0.260" Bore Thermowells (Sold Separately)

Probe Length Equals Thermowell Stem Length

Adjustable Self-Griping Spring Allows for Use in Shorter Length Thermowells

M12 Extension Cables, 4 to 20 mA Transmitters and Other Accessories Available

Large Selection of Industrial Thermowells

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.


Our RTD sensors with M12 connections provide for easy and efficient installation or removal of these sensors for preriodic calibration, troubleshooting or replacement. Gone are the days of having to pull extension cables from cable trays, or disconnect the probe leads from screw terminals in a connection head, in order to calibrate or replace the sensor. Now you simply disconnect the sensor from the extension cable saving cost and downtime. The M12 connector also provides two other important features, the keyed connector eliminates the potential for mis-wiring during installation, and the elimination of screw terminals results in a more robust connection that will not loosen when exposed to heating and cooling cycles


The Series PR-26SL Spring Loaded RTD has been designed to provide our customers with a simple, effective way to adapt our M12 enabled RTD probes for use in thermowells. To insure the best possible performance, the PR-26SL RTD has a spring loading feature that maintains contact between the probe and thermowell under static and vibration conditions. This helps to maintain good heat transfer between the thermowell and probe, as well as dampening the effect of vibration on the sensor. With a demonstrated ability to withstand 10gs of vibration between 10 and 500HZ (for 6" long and shorter probes per MIL-STD-202G, Method 204D, Test Condition A), this probe has shown its ability to withstand real-world conditions.


To select the right length probe for your application, simply measure the depth of the bore in the thermowell (the length from the top of the thermowell to the bottom of the bore as shown as the "Thermowell Stem Length" in the sketch below).


 


The PR-26SL sensor assembly is designed to fit into a thermowell with a stem length equal to that specified in the model number. Simply slide the sensor assembly into the thermowell until bottomed and then compress the spring while making the 1/2NPT connection. Thread sealant tape or thread compound may be used on the 1/2NPT mounting thread to insure easy removal at a later time. The position of the self-gripping spring can also be adjusted so that the sensor can be used in a shorter thermowell, simply twist the spring while sliding it along the probe stem until the needed position is reached.


The PR-26SL can also be used as a back-up sensor for a variety of applications. The spring loading feature can be adjusted to fit a variety of thermowells. The spring loading fitting can be removed altogether and replaced with a compression type fitting if a fixed mounting is needed. The probe (less spring and hex fitting) can also be used with one of Omega's M12-Handle accessories to turn your spring loaded probe into a hand-held probe. This flexibility in mounting options, as well as the simplified and robust connection provided by the M12 connector, makes the PR-26SL the perfect solution for a wide variety of applications.


These RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements (see the wiring diagrams below) and using only those wires needed for your connection. This allows for simplified, trouble free installation with any existing application. This also allows the PR-26SL series sensor to be used for a wide variety of replacement applications since it can be connected as-is with just about any measurement or control equipment available.


  

When ordering your PR-26SL sensor, don't forget your extension cable. Omega offers a wide selection of extension cables including over molded PVC, LCP/PFA, Polyurethane and Silicone cables, as well as customized cables in a variety of cable materials with optional stainless steel braid or hose for improved mechanical protection. Omega also offers a selection of programmable and fixed range transmitters fitted with M12 connections, and a wide selection of controllers, panel meters and other instruments to complete your measurement needs.


Specifications:

Metal Parts: 316L Stainless Steel Sheath and Housing.


Connector: 4-Pin "A"-Coded M12 Plug Connector.


Standard Probe Diameter: 1/4"


Standard Probe Lengths: See Thermowell Stem Lengths in The Order Table Below.


Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) Standard, Pt1000 and Other Options Available.


Accuracy: Class A Standard (per IEC 60751), Others Available Upon Request.


Temperature Range: -50 to 500°C Except for the Connector Which is 250°C Max.


Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient Temperature.


Vibration Resistance: 10gs from 10-500Hz per MIL-STD-202G, Method 204D, Test Condition A.




猜你喜欢