来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>自动化仪器仪表>传感器/变送器>温度传感器> 1/4-SLK_SLF-12-12-14簧压温度传感器簧压接头美国OMEGA欧米茄

商品编号:74373
分享

1/4-SLK_SLF-12-12-14簧压温度传感器簧压接头美国OMEGA欧米茄

价    格:询价

产    地:美国更新时间:2021/9/10 14:45:14

品    牌:欧米茄型    号:1/4-SLK

状    态:正常点击量:307

15221105376
联系我时,请说明是在来宝网上看到的,谢谢!

上海茂培电子科技有限公司

联 系 人:范先生

电     话:15221105376

传     真:

等     级: (第 9年)

性     质:贸易型,

联系我时请说在来宝网上看到的,谢谢!




1/4-SLK_SLF-12-12-14簧压温度传感器簧压接头美国OMEGA欧米茄

安装简单,无需工具,只需执行以下操作:


要安装单面1/2 NPT接头,将六角外壳滑到探针上,使1/2 NPT螺纹指向热电偶套管或其他合适的连接点。将自动夹紧弹簧滑到探针上,宽端朝向六角外壳,然后滑入到位。然后可以根据需要调整总成的位置。





对于SLF12-12-14,将探针头滑入配件的较大开口端,顺时针转动探针,同时推动探针穿过配件。将探针安装到所需的长度,如有必要,可将探针拉出,以重新调整接头的位置。




产品参数

1/4-SLK_SLF-12-12-14簧压温度传感器簧压接头美国OMEGA欧米茄

例如:


在不使用连接头的情况下,是否需要在热电偶套管中安装1/4“直径的传感器?将1/4-SLK弹簧加载装置安装到传感器上,以确保与热电偶套管底部正确接触,而不必担心传感器是否过度插入或插入热电偶套管孔内。




如果您需要将传感器安装在热电偶套管中,同时使用外壳进行接线,那么SLF-12-12-14弹簧加载配件可与我们广泛的卫生或工业连接头一起使用。


您是否突然出现故障,需要更换安装在热电偶套管上的RTD或热电偶?如果您有一个可切割的RTD传感器或热电偶传感器,只需将传感器切割到一定长度,添加一个弹簧加载配件,您就可以开始运行了。



产品介绍

1/4-SLK_SLF-12-12-14簧压温度传感器簧压接头美国OMEGA欧米茄

Easy Installation on Any ?" Diameter Probe (RTD, Thermcouple or Thermistor)

Self Gripping Spring Design Allows Unlimited Adjustability

Great For Installing Replacement Sensors in Thermowells

Spring Loaded Fitting Can be Used with a Wide Variety of ? NPT Connection Heads


These spring loaded fittings provide another easy way to utilize your Omega temperature sensors.


For example:

Do you need to install a 1/4" diameter sensor in a thermowell without the use of a connection head? Install the 1/4-SLK spring loaded fitting onto your sensor to insure proper contact with the bottom of your thermowell without worrying if your sensor is over inserted or under inserted into the thermowell bore.


If you need to install your sensor in a thermowell while also using an enclosure for your wire connections, the SLF-12-12-14 spring loaded fitting can be used along with one of our extensive line of sanitary or industrial connection heads.

Did you have a sudden failure and need to replace your thermowell mounted RTD or thermocouple? If you have one of our cuttable RTD Sensors or Thermocouple sensors, just cut the sensor to length, add a spring loaded fitting and you are up and running.




猜你喜欢