来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>自动化仪器仪表>传感器/变送器>传感器/变送器> IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEG

商品编号:74628
分享

IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEG

价    格:询价

产    地:美国更新时间:2019/9/11 7:42:53

品    牌:欧米茄型    号:IP411-X15

状    态:正常点击量:24

15221105376
联系我时,请说明是在来宝网上看到的,谢谢!

上海茂培电子科技有限公司

联 系 人:范先生

电     话:15221105376

传     真:

等     级: (第 4年)

性     质:贸易型,

联系我时请说在来宝网上看到的,谢谢!




IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEGA

整体式刻度盘控制压力指示器


IP 413具有手动超控功能


电磁阀设计消除泄漏


可与未过滤的主送风一起使用


现场校准的零点和量程调整


IP411和IP413型接受4-20 mA、0-10 V和0-5 V信号,并将这些模拟信号转换为比例线性气动输出(3-15或0-20 psi)。与其他排气以保持压力的装置不同,IP411和IP413使用硅压力传感器和电空转换器来提供所需的气压,而无需持续的空气消耗。该转换器独特的设计消除了常见问题,如软管抖动和不必要的空气消耗,这些问题是由热、老化、水分、污染、安装、方向错误、粘性阀、阀门泄漏和堵塞引起的。IP411和IP413提供了将电信号转换为气压的可靠、可重复和准确的方法。



产品参数

IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEGA

规格


电源电压:18至28 Vac或Vdc


电源电流:150 mA/3 VA


精度:1.0%fs


调零:±50%


跨度调整:±25%


工作温度:32至160°F(0至70°C)


补偿温度:32至160°F(0至70°C)


热效应:零:±0.025%fs/°F范围:±0.01%fs/°F


最大供应压力:40磅/平方英寸


最小供应压力:高于最大控制压力0.1 PSIG


电磁阀类型:浮动提升阀


电磁线圈:3瓦


流速:0.5 scfm


压力端口:软管倒钩配合3/16“ID管


最小控制压力油管长度:5英尺(1.5米)


电气接头:螺纹端子


重量:350克(12盎司)


管汇材质:铝


外壳:16号钢



产品介绍

IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEGA

Integral Dial Control Pressure Indicator

IP 413 has a Manual Override Feature

Solenoid Valve Design Eliminates Leaks

Can Be Used with Unfiltered Main Air Supply

Zero and Span Adjustments for Field Calibration

Models IP411 and IP413 accept 4-20 mA, 0-10 V and 0-5 V signals and convert these analog signals to proportional linear pneumatic outputs (3-15 or 0-20 psi). Unlike other units which bleed air to maintain pressure, the IP411 and IP413 use a silicon pressure sensor and an electropneumatic converter to provide the desired pneumatic pressure without constant air consumption. The converter’s unique design eliminates common problems such as hose chatter and needless air consumption from air leaks caused by heat, age, moisture, contamination, mounting, orientation error, sticky valves, valve leakage and blockages. The IP411 and IP413 provide a reliable, repeatable, and accurate means of converting an electrical signal into a pneumatic pressure.


SPECIFICATIONS

Supply Voltage: 18 to 28 Vac or Vdc

Supply Current: 150 mA/3 VA

Accuracy: 1.0% FS

Zero Adjustment: ±50%

Span Adjustment: ±25%

Operating Temp: 32 to 160°F (0 to 70°C) 

Compensated Temp: 32 to 160°F (0 to 70°C)

Thermal Effects: Zero: ±0.025%FS/°F Span: ±0.01%FS/°F

Max Supply Pressure: 40 psig

Min Supply Pressure:0.1 psig above maximum control pressure

Solenoid Type: Floating poppet 

Solenoid Coil: 3 watts

Flow Rate: 0.5 SCFM

Pressure Port: Hose barb fits 3/16" ID Tubing

Minimum Control Pressure Tubing Length: 5 ft (1.5 m)

Electrical Connector: Screw terminals

Weight: 350 grams (12 oz)

Manifold Material: Aluminum

Case: 16 gage steel




猜你喜欢