来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>自动化仪器仪表>电工仪器仪表>微弱信号测量> 德国Femto低频电压放大器DLPVA-100-BUN-S

商品编号:53641
分享

德国Femto低频电压放大器DLPVA-100-BUN-S

价    格:询价

产    地:德国更新时间:2019/7/15 13:41:34

品    牌:Femto型    号:DLPVA-100-BUN-S

状    态:正常点击量:1619

联系我时,请说明是在来宝网上看到的,谢谢!

联 系 人:

电     话:

传     真:

等     级:

性     质:

联系我时请说在来宝网上看到的,谢谢!




Offset Drift
The temperature drift of the input offset voltage is one of the decisive characteristics for the quality of a DC voltage amplifier. FEMTO Voltage Amplifiers have the DC performance of precision amplifiers. Therefore, even the 100 dB gain is well suited for DC-coupling without the need for permanent offset voltage adjustments.

Bandwidth
The bandwidth of an ideal variable gain amplifier is independent of the gain setting which is very important for measuring fast signals and pulses. The bandwidth of FEMTO`s DLPVA Amplifiers remains constant at 100 kHz (-3 dB) up to the highest gain setting. Wideband noise can be reduced by switching the upper cut-off-frequency to 1 kHz.

Controls
Parameters, e.g. gain settings, bandwidth etc. can all be controlled by local switches directly on the amplifier. Operation is straightforward and the chosen gain setting is displayed by LEDs. For remote control, each switch is provided with a corresponding TTL-Bit. Mixed operation is also possible.

Flexibility
Six different DLPVA models offer a high degree of flexibility. Our customers can choose either a single ended or a true differential input. The input impedance is 1 MΩ or lower for our bipolar models and an exceptional high 1 TΩ for our FET models allowing measurements of signals from very high impedance sources. Finally the noise is as low as 0.4 nV/√Hz for the model DLPVA-100-BUN-S.


产品参数

• Switchable Gain up to 100 dB (x 100,000)
• Bandwidth DC to 100 kHz
• DC-Drift 0.6 µV/°C
• Input Noise down to 0.4 nV/√Hz
• Switchable AC/DC-Coupling
• Local and Remote Control
• Input Impedance up to 1 TΩ




猜你喜欢