来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>行业专用>行业专用仪器/仪表>仪器> OM-CP-VOLT101A-30V_OM-CP-VOLT101A-160MV电压数据记录器OMEG

商品编号:74944
分享

OM-CP-VOLT101A-30V_OM-CP-VOLT101A-160MV电压数据记录器OMEG

价    格:询价

产    地:美国更新时间:2019/9/11 7:42:53

品    牌:欧米茄型    号:OM-CP-VOLT101A-30V

状    态:正常点击量:44

15221105376
联系我时,请说明是在来宝网上看到的,谢谢!

上海茂培电子科技有限公司

联 系 人:范先生

电     话:15221105376

传     真:

等     级: (第 4年)

性     质:贸易型,

联系我时请说在来宝网上看到的,谢谢!




OM-CP-VOLT101A-30V_OM-CP-VOLT101A-160MV电压数据记录器OMEGA欧米茄

4赫兹读数率


多重启动/停止功能


可编程工程单元


大数据存储1000000个读数


10年电池寿命


LED报警


高速下载功能


即装即用


免费NIST认证



产品参数

OM-CP-VOLT101A-30V_OM-CP-VOLT101A-160MV电压数据记录器OMEGA欧米茄

输入连接:可拆卸螺钉终端


规定精度范围:25°C时的标称范围


模拟转换时间:133 ms


频率抑制:50/60Hz


警报:用户可选择的上限和下限;警报和低电池LED闪烁


启动模式:软件可编程立即启动、提前18个月延迟启动、多重启动/停止模式


多重启动/停止模式:多次启动和停止设备,无需下载数据或与PC通信。


多启动/停止模式激活:


启动设备:按住按钮,绿色LED每秒闪烁两次。三秒钟后,绿色将快速闪烁两秒钟;设备已开始记录。


停止装置:按住按钮,红色LED每秒闪烁两次;


三秒钟后,红色将快速闪烁两秒钟;设备已停止记录


内存:1000000个读数;软件可配置内存包装;增强启动/停止模式下的330000个读数


环绕:是的


读数率:每24小时4次读数(4赫兹)至1次读数


LED功能:


绿色LED闪烁:10秒表示记录15秒表示延迟启动模式


红色LED闪烁:10秒表示电池电量不足和/或内存不足,1秒表示警报状态。


密码保护:可在设备中设置可选密码,以限制对配置选项的访问。无需密码即可读取数据


实时记录:可与PC机一起实时监控和记录数据


校准:通过软件进行数字校准


校准日期:装置内自动记录


电池类型:3.6V锂电池(含)用户可更换


电池寿命:10年,典型的15分钟读取率


数据格式:日期和时间戳V、MV、V、软件指定的工程单位


时间精度:±1分钟/月(20℃时,独立测井)


计算机接口:USB(需要接口电缆);115200波特


软件:Win XP SP3/Vista/7和8(32位和64位)


工作环境:-40至80°C(-40至176°F)


0至95%相对湿度,无冷凝


尺寸:


数据记录器:36 H x 56 W x 16 mm D(1.4 x 2.2 x 0.6“)


水箱外壳:74 H x 148 W x 39 mm D(2.9 x 5.8 x 1.5“)


重量:24克(0.9盎司)


材料:


数据记录器:ABS塑料


水箱外壳:黑色阳极氧化铝



产品介绍

OM-CP-VOLT101A-30V_OM-CP-VOLT101A-160MV电压数据记录器OMEGA欧米茄

4 Hz Reading Rate

Multiple Start/Stop Function

Programmable Engineering Units

Large Data Storage 1,000,000 Readings

10-Year Battery Life

LED Alarming

High Speed Download Capability

Ready to Use Right Out-of-the-Box

Free NIST Certification


Voltage is one of the most fundamental and useful types of measurement performed today. Many scientific instruments and sensors provide a voltage output that represents the magnitude of some parameter being measured such as temperature, pH, flow rate, pressure, strain, etc. 


The OM-CP-VOLT101A provides a low cost solution for adding recording capability to an already existing measurement system. Its high accuracy and 16-bit resolution place this product at the forefront for low level DC voltage recording devices. This device is ideal for accurately measuring and recording battery voltages, sensor output signals, photovoltaic studies, as well as many other low level DC voltage sources. With user programmable engineering units, the user can scale the input voltage to most any type of unit desired automatically. This is a unique and very useful feature for presentations.


The OM-CP-VOLT101A is available in four different input ranges: 160 mV, 2.5V, 15V and 30V versions. Data retrieval is simple. Plug the device into an available COM port and our easy-to-use software does the rest. The software converts a PC into a real-time strip chart recorder. Data can be printed in graphical and tabular format or exported to a text or Microsoft Excel file. 


Specifications

Input Connection: Removable screw terminal

Specified Accuracy Range: Nominal range @ 25°C

Analog Conversion Time: 133 mS

Frequency Rejection: 50/60 Hz

Alarm: User selectable high and low limits; blinking LED for alarm and low battery

Start Modes: Software programmable immediate start, delay start up to 18 months in advance, multiple start/stop mode

Multiple Start/Stop Mode: Start and stop the device multiple times without having to download data or communicate with a PC

Multiple Start/Stop Mode Activation:

To Start Device: Press and hold the pushbutton and the green LED will flash twice a second. After three seconds, the green will flash rapidly for two seconds; the device has started logging.

To Stop Device: Press and hold the pushbutton and the red LED will flash twice a second;

after three seconds, red will flash rapidly for two seconds; the device has stopped logging

Memory: 1,000,000 readings; software configurable memory wrap; 330,000 readings in enhanced start/stop mode

Wrap Around: Yes

Reading Rate: 4 readings a second (4 hz) to 1 reading every 24 hours

LED Functionality:

Green LED Blinks: 10 seconds to indicate logging 15 seconds to indicate delay start mode

Red LED Blinks: 10 seconds to indicate low battery and/or memory 1 second to indicate an alarm condition

Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password

Real Time Recording: May be used with PC to monitor and record data in real time

Calibration: Digital calibration through software

Calibration Date: Automatically recorded within device

Battery Type: 3.6V lithium battery (included) user replaceable

Battery Life: 10 years typical at a 15 minute reading rate

Data Format: Date and time stamped V, mV, V, engineering units specified through software

Time Accuracy: ±1 minute/month (at 20oC, stand alone logging)

Computer Interface: USB (interface cable required); 115,200 baud

Software: WIN XP SP3/Vista/7 and 8 (32 and 64-bit)

Operating Environment: -40 to 80°C (-40 to 176°F)

0 to 95% RH non-condensing

Dimensions:

  Data Logger: 36 H x 56 W x 16 mm D (1.4 x 2.2 x 0.6")

  Waterbox Enclosure: 74 H x 148 W x 39 mm D (2.9 x 5.8 x 1.5")

Weight: 24 g (0.9 oz)

Materials:

  Data Logger: ABS Plastic

  Waterbox Enclosure: Black anodized aluminum




猜你喜欢