In-VitroCell二氧化碳孵化器提供可靠的体外细胞培养成长环境

In-VitroCell二氧化碳孵化器设计配备了NuTouch智能界面，友好的彩色触摸屏提供英语、西班牙语、德语和法语选择。室参数可通过手指触摸控制，还可以通过USB接口查看和下载历史监控记录。可编程的维护提醒能够在屏幕上显示过滤器检查及可用性。

In-VitroCell CO2 Incubators Provide a Reliable Controlled In-Vitro Environment for Cell Culture Growth

30 Oct 2012

In-VitroCell CO₂ incubators are designed with the NuTouch Intelligent Interface. NuTouch is a user-friendly color touch screen offered in English, Spanish, German, and French. Chamber parameters are easily controlled by the touch of a finger. A historical monitor records chamber performance that can be viewed onscreen or downloaded via USB. Programmable maintenance reminders appear onscreen to indicate filter check or if available, refill relative humidity (RH) evaporator box. Onscreen descriptions and instructions are available if clarification is needed.

All In-VitroCell models utilize a single source dual wave infrared (IR) sensor to maintain accurate CO₂ gas levels in the growth chamber. The wavelengths used are absorbed by only CO₂ making the measurement insensitive to other components such as water vapor. A large seven (7) cubic foot (200 Liter) interior chamber is surrounded by heating elements on all six (6) sides of the chamber encased by high density R5 insulation to produce a smaller incubator footprint.

 

Dual temperature sensor probes maintain precise temperature uniformity while an individual door heater minimizes condensation build up on the inner glass door. The inner chamber is constructed of 16 gauge, type 304L, polished stainless steel using crevice-free construction, which provides an easily cleanable inert surface that does NOT promote biological growth.

All shelves, shelf supports, and guide rails are easily removable and can be autoclaved separately. Models NU-5810 and higher offer two heated sterilization cycles that can be selected to eradicate contaminating agents at 95°C humidified decontamination or 145°C dry sterilization providing the ability to leave shelves, supports, guides, and water pan in the chamber. HEPA filters do NOT have to be removed.

A Closed Loop HEPA Filtration system offers ISO Class 5 Conditions similar to a cleanroom. The chamber is maintained at positive pressure to prevent contaminated room air from entering the chamber. The chamber air is continuously HEPA filtered and sampled to maintain a clean and uniform chamber lowering airflow to a single air change every 20 minutes to minimize cell desiccation.

The NuAire In-VitroCell ES line of CO₂ incubators provide constant contamination control (C3) against potential contaminates that may disrupt your research.